Put your cursor over the "Sound Sets" label to the left and select the desired
Sound Set Group.
|
Available back level chips for After Market Sound Systems
1)
User Guide, QS2p:
With any firmware purchase, you may have a copy of the QS2pTM booklet, no charge, with order, by request.
While not all of the Resets will be available as described in the
manual, you will be able to determine which ones work and what they are
for.
How is that done?
If, while in any Reset state other than the ones for setting the Loco
Numbers, repeated pressing of the Horn button consistently returns only
1 ding, that Reset State is not active.
For the Loco number:
In QS2p and some firmware prior to QS2p, Resets # 2, 15, 16.
In QS3000, Resets # 2, 44.
After putting in a number, if retrieval doesn't work, that state is not active.
The QS2p After Market chips are listed on the Sound Sets page.
Any engine sounds not listed here can be selected from the QS2p list.
General Features:
All versions have Self-Recharging Ni Cad Battery backup/auto shut-off. Manual Volume control.
2)
MTH Proto OneTM
Chips only price $5.
Works in 233 or 237 board.
Whistle
or Horn & Bell. Steam Chuffing, Diesel Roar or Electric Motor
sounds. Air Compressor sounds. Transformer operated Remote Lock-out,
Prime Mover Volume adjustment. No coil coupler capability.
PE 200 EMD Diesel
PE 201 Large Steam
PE 202 Electric
3)
MTH Proto PlusTM
Chips only price $10
Works in 233 or 237 board.
All features of Proto One, plus:
1 Coil Coupler op with breaking air lines and knuckle clunk. Coupler on/off. Slave. Loco direction start up
PE 301 Baldwin Diesel
PE 302 General Electric Diesel
PE 303 FM Diesel
PE 304 Alco Diesel, 3 chime horn
PE 350 Small Steam
PE 352 Large Steam
PE 353 Articulated Steam
4)
MTH Proto DeluxeTM
Chips only price $15
Works in 233 or 237 board.
All features of Proto Plus, plus:
Temporary
ID, Roadname ID, Engine type ID loco numbering. Overhead Blinking
Light. Demo mode. Operational Clear, Horn-Whistle/Bell settings. Chuff
Rate settings.
PE 400 EMD1 Diesel
PE 402 EMD3 Diesel
PE 404 General Electric Diesel
PE 407 Alco 1 Diesel, 3 chime horn
PE 425 GG-1 Electric
PE 450 Small Steam
PE 451 PRR Small Steam
PE 460 Medium Steam
PE 461 PRR Medium Steam
PE 470 Large Steam
PE 471 GS-4 Large Steam
PE 473 N&W Large Steam
PE 480 Medium Articulated Steam
PE 481 Large Articulated Steam
PE 482 PRR Articulated Steam
All of the above sound sets are not compatible with non-linear transformers.
The following are compatible with non-linear transformers:
See: Transformers
5)
MTH Proto Deluxe II TM
Chips only price $20.
Works in 237 board.
Has all features listed for Proto Deluxe plus:
Diesel Motor Power Up and Shutdown, Steam Water Injectors, Steam Boiler Blow Down, Poppet Release Valves,
Squealing Flanges on Curves,
50-200 Diesel
50-201 Steam
50-350 Small Steam
PE 400-2 EMD1 Diesel
PE-403-2 Baldwin Diesel
PE 404-2 EMD3 Diesel
PE 407-2 Alco1 Diesel
50-425-2 GG-1 Electric
50-450-2 Small Steam
PE 450-2 Small Steam
PE 451-2PRR Small Steam
PE 460-2 / 50-460-2 Medium Steam
PE 461-2 / 50-461-2 PRR Medium Steam
PE 463-2 Hudson Steam
50-470-2 Large Steam
PE 471-2 / 50-471-2 GS-4 Large Steam
PE 473-2 N&W Big Steam
PE 480-2 Medium Articulated Steam
PE 482-2 / 50-481-2 Large Articulated Steam
Whistle or Horn & Bell. Steam Chuffing, Diesel Roar or Electric
Motor sounds Motor startup. Cab Chatter.
Air Compressor sounds. Transformer operated Remote
Lock-out, Prime Mover Volume adjustment. 1 coil coupler capability.
Resets 20 & 25 programmable (To provide whistle in run and bell in neutral or both in both). Remote Lockout,
Overhead blinking Light.
PE 800 C30-7 GE Late Diesel
PE 801 Alco PA
PE 802 GP-9
PE 900 CHLNGR (Challenger)
PE 901 USRA
6)
QSI OEMTM
Chip price: $10.
A very simple & solid to operate sound system.
Used by 3rd-Rail and Weaver.
Solid Diesel or Steamer sounds, Bell and Horn or Whistle. No CC. No Resets.
See the Sound Sets: Available OEM Chips page for list of available chips.
|
|