After Market Sound System
Prices
The full fledged, user installable sounds way:
1) Select a QSI Sound System, 2 ways to go:
A) After Market Three Board (install it yourself on the QSI Reverse Unit of your Choice)
B) Two Board (installed for you). See "Supported Hobby Shops", choose a state and look for "QSI Qualified Installer", or contact STR.
2) QSI After Market 3 board Sound System with your choice of Sound Set.
Kit includes board, chip, and power supply, speaker, battery and instructions.
Must be plugged into a QSI Reverse unit of your choice; purchased separately (except ACRU-E).
See: AC&DC Motor Reverse Units and then select either AC Motor Reverse Units or DC Motor Reverse Units.
3) QS2p-XXX(P or F) $189
QSI After Market 3 board Sound System with your choice of QS2p Sound Set.
Kit set as above.
4) Replacement boards: priced without sound set chip:
Top boards: "QS1C5". Has the 237 micro Processor, used
Flat: $50
Folded: Add $5 to the above.
QS2p latest level chip, D or E level: $35.Note: Some D level chips were nevr reworked to E level.
5) After Market "QS1C4" Has the 233 micro Processor, used. Not compatible with QS2p chips.
6) All earlier versions of the After Market top board have been scrapped due to the inability to economically re-initialize them.
For those converting from a working QS1 board, a $10 credit is issued for turning one in for each QS1C5 (QSI or MTH) After Market Sound board purchased, either separately or in conjunction with a QSI Sound System.
This discount available by request when ordering.
7) QS3-XXX(P or F) $219 A very few are still available
QSI After Market 3 board Sound System with your choice of QS-3000 Sound Set.
Kit set equipped same as the QS2p, above.
Must be plugged into a QSI Reverse unit of your choice; purchased separately (except ACRU-E).
8) QS-3000 After Market (short pin) boards:
Flat: with QS-3000 chip: $149, without: $104. A few are still availble Can be made from a long pin version (MTH): Add $5
Folded: Add $5 to the above.
QS3000 latest level chip D or E level: $45. Note: Some D level chips were nevr reworked to E level.
9) Replacement After Market chips:
10) "Obsolete Chips" Listing Deleted
All QS1, QS2 Boards & Chips are obsolete, and not available, nor economically repairable.
All OEM, Proto One, Proto Plus, Proto Deluxe and Proto Deluxe II Chips are obsolete. Many are available. Call.
11) QS2p Revision D or E: $35
Price of selected obsolete chip will be deducted from the QS2p chip price for your sound kit cost.
12) QS-3000 chips, revisions D or E: After Market: $45.
Some early revision level chips are available for $10.ea. Deduction is $35 from cost of QS-3000 kit.
13) Power Supply boards: "PS-1" with all updates: $75
14) Coil Coupler drivers and kits for After Market sound systems:
15) Coil coupler circuit board:
When you already have a coil coupler:
Single coupler circuit board: ACS-700: $22
Dual coil coupler circuit board: ACS714: $39
When not available, will send 2 ACS-700's for $39
16) Coil coupler kit:
When you also need a coil coupler:
Single coil coupler kit: ACS-702 $29
Dual coil coupler kit: ACS-704: $49
When not available, will send 2 ACS-702's for $49
17) Coil Coupler: $10.
User manuals available:
18 ) QS2p: $12.00. Free with purchase and shipped with any product.
While useful with locos containing obsolete chips, there are limitations. See first 3 paragraphs in
Sound Sets: Available Bk Level Chips.
19) QS-3000: The original versions of these manuals are available online at QSIndustries
Locate the QS-3000 pdf file and click on it to download.
QS-3000 manual updates, designed to match the pdf file, are available from STR for $15. ea.
29) PowerGuard:
Protect all your locos' electronics from transformer generated spikes.
Warranty coverage of the sound boards.
ACS-730 QSI PowerGuard info.
30) See "Shipping etc." page for details.
|