The Scaled Tin Rail, LLC.

QSIndustries, Inc. Warranty for QS-2p, QS-3000

Limited warranty: The QS-1, QS-2, all MTH ProtoSound variations both installed and After Market, QS-2p, & QS-3000 hardware, except the NiCad battery, will be free from defects in materials and workmanship for a period of one year from the date of purchase. We reserve the right to either repair or replace the unit at our discretion. Our obligation is limited to the replacement cost of the QSI product. Any implied warranties on hardware and software are limited to one (1) year and 90 days, respectively. The NiCad battery has a 90 day warranty from the day of purchase. This limited warranty gives you specific legal rights. You may have others which vary from state to state.

The limited warranty does not apply to any QSI Sound System listed above: a) damaged by accident, misuse, transformer power spikes or improper installation, b) altered or repaired by anyone other than STR, LLC. or one of its authorized service centers, c) used with altered or copied software, d) used with transformers, power supplies or other equipment not approved by QSI or not designed within the limits specified in the QSI document entitled, Three-Rail  Electrical Operating Specifications (T.R.E.O.S.), e) used with the Train America Studio's UCUB board. Warranty issues on QS-3000 used with UCUB are the responsibility of Train America Studios, 970 Windham Court, Suite #9, Youngstown, OH 44512, (330) 629-7625.

Limited Warranty service may be obtained by mailing the product during the warranty period to The Scaled Tin Rail, LLC., postage prepaid, using the original shipping container or equivalent to prevent damage to the product. STR renews the warranty period for 1 year on all purchased, upgraded and/or repaired QSI products.

Operation without a QSI designed PowerGuard voids STR's new 1 year warranty on all locomotive sound systems. PowerGuard is available from STR.

ALL EXPRESSED AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION AS STATED ABOVE AND NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, WILL APPLY AFTER THIS PERIOD.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. IN NO EVENT WILL THE COMPANY BE LIABLE TO YOU FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE SUCH PRODUCT, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

NOTE: ALWAYS CHECK YOUR ABOVE LISTED QSI SOUND SYSTEM  FOR PROPER OPERATION AND COMPATIBILITY WITH YOUR EQUIPMENT BEFORE USING. UNDER NO CIRCUMSTANCES WILL QSINDUSTRIES, INC. NOR THE SCALED TIN RAIL, LLC, BE LIABLE FOR DAMAGE TO OTHER PRODUCTS OR EQUIPMENT.

QS Industries, Inc. Software License Agreement

1. Grant of License: QSIndustries, Inc. grants you, the owner, the right to use the software that is included with your QS-3000 system only with the QS-3000 hardware that you purchased.

2. Copyright: The software is owned by QSIndustries, Inc. and is protected by United States copyright laws and international treaty provisions. Therefore, neither you nor anyone else may copy the software.

3. Limited Warranty: QSIndustries Inc. warrants that: a) the software will perform substantially in accordance with the accompanying written materials for a period of ninety (90) days from the day of receipt.

Proprietary Rights and Obligations

The structure and organization of the Software/Firmware are the valuable property of QSIndustries, Inc. You will not make or have made, or permit to be made, any copies of the Hardware, Software/Firmware, code, or any portions thereof. You are not to modify, adapt, translate, reverse engineer, de-compile, disassemble or create derivative works based on the Hardware or Software/Firmware. Trademarks shall be used in accordance with accepted trademark practice, including identification of trademark owner's name. The QS-3000 Hardware, Software and Firmware may be covered by any of the following U.S. Patent No. 4,914,431; 5,184,048; 5,267,318; 5,394,068; 5,448,142; 5,633,985; 5,832,431; 5,896,017; 5,492,290; 5,590,856; 5,773,939; 5,940,005; 6,230,140; 7,429,931 B2; 7,451,708 B2; and other US and Foreign patents pending.

No Other Rights

QSIndustries, Inc. retains ownership of the QS-1, QS-2, QS-2p, QS-3000 Hardware design and operating Software/Firmware code. Except as stated above, this agreement does not grant you any rights to intellectual property rights in the QS-3000 Software, Firmware or Hardware. The use of any trademarks as herein authorized does not give you any rights of ownership in that trademark.

How To Obtain Upgrades To The Software And New Product Information

All public information is be found at either at QSIndurstries.com or at The-Scaled-Tin-Rail.com. The later is updated continually as new information becomes available.